Description:
DAB FEKA VS 750 Submersible Pump

A stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller. Suitable for lifting non aggressive sewage and grey water containing solid matter up to 50mm.

Motor

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version is available with or without float. Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Features

50mm free passage
Liquid temperature range from 0°C to +35°C
Maximum immersion depth of 7m
Motor protection class IP68
Insulation class F
10m H07RN-F cable
Can be installed fixed or portable, vertical position

Specification:

Overall Height (mm): 492
Overall Diameter (mm): 203
Outlet Diameter: 2″ F
Weight (kg): 16.3

Description:
DAB FEKA VS 750 Submersible Pump

A stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller. Suitable for lifting non aggressive sewage and grey water containing solid matter up to 50mm.

Motor

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version is available with or without float. Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Features

50mm free passage
Liquid temperature range from 0°C to +35°C
Maximum immersion depth of 7m
Motor protection class IP68
Insulation class F
10m H07RN-F cable
Can be installed fixed or portable, vertical position

Specification:

Overall Height (mm): 492
Overall Diameter (mm): 203
Outlet Diameter: 2″ F
Weight (kg): 16.3

Description:
DAB FEKA VS 750 Submersible Pump

A stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller. Suitable for lifting non aggressive sewage and grey water containing solid matter up to 50mm.

Motor

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version is available with or without float. Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Features

50mm free passage
Liquid temperature range from 0°C to +35°C
Maximum immersion depth of 7m
Motor protection class IP68
Insulation class F
10m H07RN-F cable
Can be installed fixed or portable, vertical position

Specification:

Overall Height (mm): 492
Overall Diameter (mm): 203
Outlet Diameter: 2″ F
Weight (kg): 16.3

Description:
DAB FEKA VS 750 Submersible Pump

A stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller. Suitable for lifting non aggressive sewage and grey water containing solid matter up to 50mm.

Motor

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version is available with or without float. Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Features

50mm free passage
Liquid temperature range from 0°C to +35°C
Maximum immersion depth of 7m
Motor protection class IP68
Insulation class F
10m H07RN-F cable
Can be installed fixed or portable, vertical position

Specification:

Overall Height (mm): 492
Overall Diameter (mm): 203
Outlet Diameter: 2″ F
Weight (kg): 16.3

Description:
DAB FEKA VS 750 Submersible Pump

A stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller. Suitable for lifting non aggressive sewage and grey water containing solid matter up to 50mm.

Motor

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version is available with or without float. Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Features

50mm free passage
Liquid temperature range from 0°C to +35°C
Maximum immersion depth of 7m
Motor protection class IP68
Insulation class F
10m H07RN-F cable
Can be installed fixed or portable, vertical position

Specification:

Overall Height (mm): 492
Overall Diameter (mm): 203
Outlet Diameter: 2″ F
Weight (kg): 16.3

Description:
DAB FEKA VS 750 Submersible Pump

A stainless steel submersible centrifugal pump with microcast steel liquid vortex impeller. Suitable for lifting non aggressive sewage and grey water containing solid matter up to 50mm.

Motor

Dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, selected to ensure low noise and durability. Overcurrent protection as standard for the single-phase version. Permanently connected capacitor in the single-phase version. Continuous duty with liquid temperature 35 °C and completely submerged pump. The single-phase version is available with or without float. Power cable: 10 metre H07RN-F, with plug for the single-phase version.

Features

50mm free passage
Liquid temperature range from 0°C to +35°C
Maximum immersion depth of 7m
Motor protection class IP68
Insulation class F
10m H07RN-F cable
Can be installed fixed or portable, vertical position

Specification:

Overall Height (mm): 492
Overall Diameter (mm): 203
Outlet Diameter: 2″ F
Weight (kg): 16.3

Description:

The models NovaPond are submersible pumps specially designed for the recirculation of water in garden ponds, to create waterfalls or other water features. They are designed to pump clean water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical installation. Environmentally safe.

Materials resistant to corrosion and oxidation. Motor with thermal overload protection.
Adjustable suction filter to enable transit of solid particles with a diameter from 5 mm to 10 mm.
Supplied with power cable and plug, and self-sealing coupling.


Operating range: from 1 to 14 m3/h with head up to 9.4 metres. Suitable for continuous operation.

Liquid temperature range: from 0 °C to +35 °C.

Pumped liquid: clean water, without fibres and with particles with maximum diam. 10 mm.

Max. immersion depth: 7 metres.

Description:

The models NovaPond are submersible pumps specially designed for the recirculation of water in garden ponds, to create waterfalls or other water features. They are designed to pump clean water containing solid particles with a maximum diameter of 10 mm.
Suitable for continuous operation. Designed for horizontal or vertical installation. Environmentally safe.

Materials resistant to corrosion and oxidation. Motor with thermal overload protection.
Adjustable suction filter to enable transit of solid particles with a diameter from 5 mm to 10 mm.
Supplied with power cable and plug, and self-sealing coupling.


Operating range: from 1 to 14 m3/h with head up to 9.4 metres. Suitable for continuous operation.

Liquid temperature range: from 0 °C to +35 °C.

Pumped liquid: clean water, without fibres and with particles with maximum diam. 10 mm.

Max. immersion depth: 7 metres.

Description:
The FEKA BVP is submersible pumps for draining and emptying applications. Suitable for pumping dirty water with solid particle size up to 38 mm.

Operating range: from 1 to 18 m3/h with head up to 12 metres.

Pumped liquid: dirty water with maximum solid particle size 38 mm.

Liquid temperature range: from 0 °C to +35 °C for domestic use.

Outlet: horiziontal 1 ½” F plus elbow 90° and hose fitting.

VERTY NOVA is a vertical delivery submersible pump suitable for domestic applications like drainage or lifting water form thanks or river. It may be used in automatic or manual mode and it's very easy to handle.

Operating range: from 1 to 10m3/h with head up to 9 metres.

Pumped liquid: dirty water without fibres.

Liquid temperature range: from 0 °C to +35 °C for domestic use.

Outlet: vertical 1” ¼ F plus hose fitting.

VERTY NOVA is a vertical delivery submersible pump suitable for domestic applications like drainage or lifting water form thanks or river. It may be used in automatic or manual mode and it's very easy to handle.

Operating range: from 1 to 10m3/h with head up to 9 metres.

Pumped liquid: dirty water without fibres.

Liquid temperature range: from 0 °C to +35 °C for domestic use.

Outlet: vertical 1” ¼ F plus hose fitting.

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

Description
Light waste water pumps are designed for pumping waste water from residential and small commercial buildings. These motors are of dry type with E or F class insulation for reliable service and pumps are offered with different type of impellers such as vortex, single channel enclosed, single channel semi open, multi-channel enclosed etc. These pumps are available in both single phase and three phase power supply for continuous duty. Double face mechanical seals ensure reliability and trouble-free service for long life. Few models are supplied with fully stainless steel

Specification
Maximum Flow upto 180m³/h
Head upto 56m
Speed 2900 RPM
Impeller Type Enclosed / Semi open Impeller
Outlet Size upto 150mm
Power upto 15kW
Liquid Temperature upto 40°C
Max Solid Size upto 19mm
Shaft Seal Mechanical Seal
Material of Construction (MOC) Cast Iron & Stainless Steel
Bearing Lubrication Grease
Maximum Immersion Depth 10m
Maximum Working Pressure upto 5bar

Features
Wide hydraulic ranges
Heavy duty bearings for long life
Dual mechanical seal
Stainless steel motor body

Application
Dewatering
Light sewage handling
Waste water transfer
Pumping water from pit, trench and basin
Flood control

TECHNICAL DATA
Operating range: from 1 to 5,4 m3
/h with head up to 46 metres.
Pumped liquid: clean, free of solids and abrasives, non-aggressive.
Liquid temperature range: from 0 °C to +35 °C.
Max. immersion depth: 12 metres.
Motor protection class: IP 68.
Motor protection rating: F.
Installation: fixed or portable, vertical position.
Operation: Manual or automatic with electronic ON/OFF (continuous duty
with totally submerged pump).
Discharge port diameter: 1”.
Pump maximum diameter: 150 mm.