Technical Information:

The DAB Jet is a self-priming centrifugal pump with excellent suction capacity even when there are air bubbles and small particles of sand in the water.

Common applications include boosting water throughout systems to increase pressure at outlets such as taps or troughs. Similarly for garden irrigation systems or rainwater harvesting, making them ideal for use in small-scale agriculture and gardening.

The DAB Jet range are fixed speed pumps and should be used in conjunction with a 20 litre pressure vessel, pump controller or basic pressure switch for maximum efficiency.

We recommend fitting the DAB Smart Press Controller which will fit directly on top of the Jet pump and start/stop the pump when the pressure changes. The Smart Press controller has dry-run protection which protects the motor from burning out in the event of no water passing through.

The pump can also be operated with a basic pressure switch. Although this method does not have any form of dry-run protection. For this method we recommend the 1-6 bar Telemecanique pressure switch. Please see here.

A pressurised vessel is recommended regardless of the control method to allow the system to work more efficiently. We recommend the 20 litre horizontal GWS vessel. Please see here.

If preferred, a pre-assembled combined package, the ‘Aquajet’ is available to order to save self-installation. Please see here.

Technical Information
Cast iron pump body and motor support
Motor support in die-cast aluminium for DAB Jet 62-82-102-112–132
Technopolymer impeller, diffuser, Venturi tube and sand guard
Stainless steel pressure discs
Carbon/ceramic mechanical seal



Model DAB JET 102M
Part Number 102660040
Max Flow 60 litres per minute (3.6m3 per hour)
Max Head 53.8m
KW 0.75 kw
HP 1 hp
Inlet/Outlet Connection 1” BSP female

Technical Information:

The DAB Jet is a self-priming centrifugal pump with excellent suction capacity even when there are air bubbles and small particles of sand in the water.

Common applications include boosting water throughout systems to increase pressure at outlets such as taps or troughs. Similarly for garden irrigation systems or rainwater harvesting, making them ideal for use in small-scale agriculture and gardening.

The DAB Jet range are fixed speed pumps and should be used in conjunction with a 20 litre pressure vessel, pump controller or basic pressure switch for maximum efficiency.

We recommend fitting the DAB Smart Press Controller which will fit directly on top of the Jet pump and start/stop the pump when the pressure changes. The Smart Press controller has dry-run protection which protects the motor from burning out in the event of no water passing through.

The pump can also be operated with a basic pressure switch. Although this method does not have any form of dry-run protection. For this method we recommend the 1-6 bar Telemecanique pressure switch. Please see here.

A pressurised vessel is recommended regardless of the control method to allow the system to work more efficiently. We recommend the 20 litre horizontal GWS vessel. Please see here.

If preferred, a pre-assembled combined package, the ‘Aquajet’ is available to order to save self-installation. Please see here.

Technical Information
Cast iron pump body and motor support
Motor support in die-cast aluminium for DAB Jet 62-82-102-112–132
Technopolymer impeller, diffuser, Venturi tube and sand guard
Stainless steel pressure discs
Carbon/ceramic mechanical seal


Model DAB JET 82M
Part Number 102660020
Max Flow 60 litres per minute (3.6m3 per hour)
Max Head 47m
KW 0.6 kw
HP 0.8 hp
Inlet/Outlet Connection 1” BSP female

Technical Information:

The DAB Jet is a self-priming centrifugal pump with excellent suction capacity even when there are air bubbles and small particles of sand in the water.

Common applications include boosting water throughout systems to increase pressure at outlets such as taps or troughs. Similarly for garden irrigation systems or rainwater harvesting, making them ideal for use in small-scale agriculture and gardening.

The DAB Jet range are fixed speed pumps and should be used in conjunction with a 20 litre pressure vessel, pump controller or basic pressure switch for maximum efficiency.

We recommend fitting the DAB Smart Press Controller which will fit directly on top of the Jet pump and start/stop the pump when the pressure changes. The Smart Press controller has dry-run protection which protects the motor from burning out in the event of no water passing through.

The pump can also be operated with a basic pressure switch. Although this method does not have any form of dry-run protection. For this method we recommend the 1-6 bar Telemecanique pressure switch. Please see here.

A pressurised vessel is recommended regardless of the control method to allow the system to work more efficiently. We recommend the 20 litre horizontal GWS vessel. Please see here.

If preferred, a pre-assembled combined package, the ‘Aquajet’ is available to order to save self-installation. Please see here.

Technical Information
Cast iron pump body and motor support
Motor support in die-cast aluminium for DAB Jet 62-82-102-112–132
Technopolymer impeller, diffuser, Venturi tube and sand guard
Stainless steel pressure discs
Carbon/ceramic mechanical seal


Model DAB JET 82M
Part Number 102660020
Max Flow 60 litres per minute (3.6m3 per hour)
Max Head 47m
KW 0.6 kw
HP 0.8 hp
Inlet/Outlet Connection 1” BSP female

Technical Information:

The DAB Jet is a self-priming centrifugal pump with excellent suction capacity even when there are air bubbles and small particles of sand in the water.

Common applications include boosting water throughout systems to increase pressure at outlets such as taps or troughs. Similarly for garden irrigation systems or rainwater harvesting, making them ideal for use in small-scale agriculture and gardening.

The DAB Jet range are fixed speed pumps and should be used in conjunction with a 20 litre pressure vessel, pump controller or basic pressure switch for maximum efficiency.

We recommend fitting the DAB Smart Press Controller which will fit directly on top of the Jet pump and start/stop the pump when the pressure changes. The Smart Press controller has dry-run protection which protects the motor from burning out in the event of no water passing through.

The pump can also be operated with a basic pressure switch. Although this method does not have any form of dry-run protection. For this method we recommend the 1-6 bar Telemecanique pressure switch. Please see here.

A pressurised vessel is recommended regardless of the control method to allow the system to work more efficiently. We recommend the 20 litre horizontal GWS vessel. Please see here.

If preferred, a pre-assembled combined package, the ‘Aquajet’ is available to order to save self-installation. Please see here.

Technical Information
Cast iron pump body and motor support
Motor support in die-cast aluminium for DAB Jet 62-82-102-112–132
Technopolymer impeller, diffuser, Venturi tube and sand guard
Stainless steel pressure discs
Carbon/ceramic mechanical seal



Specification:
Pump Models
Model DAB JET 62M
Part Number 102660000
Max Flow 50 litres per minute (3m3 per hour)
Max Head 42m
KW 0.44 kw
HP 0.6 hp
Inlet/Outlet Connection 1” BSP female

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system

Technical Information

Description
C.R.I. CT- Series pumps are horizontal single stage centrifugal monoblock type supplied with radial flow impeller for higher head and flow requirements. These pumps are rigid in construction and compact design. Centrifugal pumps are powered by a totally enclosed fan cooled motor. Monoblock construction eliminates loss of energy while transmitting the energy from the motor to pump. These pumps are available in both single phase and three phase power supply. Pump’s volute chamber and impeller are carefully designed to give the best hydraulic efficiency and suction lift characteristics. The back pull out design facilitates ease of maintenance. Single phase pumps are thermally protected. Few models are supplied with stainless steel construction.

Specification
Power Range( kW) 0.37 kW-2.2 kW
Speed 2900 rpm
Versions Single phase – 230V, 50Hz, A.C. Three phase – 380-415V, 50Hz A.C. supply
Type of Duty S1 Continuous Duty
Degree of Protection IP 44 / IP 54
Class of Insulation B
Maximum Discharge Upto 42 m³/h
Maximum Head Upto 52.5m
Max.Suction Lift Upto 7 m
Sealing Type Mechanical Seal
Max.Liquid Temperature 30°C
Max.Ambient Temperature 40°C
Max.Operating Pressure 5.2bar
Flange Standard Manufacturer Standard
Suction Flange Size in mm 25, 32, 50, & 65
Delivery Flange Size in mm 25, 40 & 50

Features
High efficiency
Compact and rigid construction
Back pull out design
Single phase pumps are thermally protected

Application
Residence
Small farms
Utility application in industries
Cooling system
Washing systems
Pressure boosting system