Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture