VERTY NOVA is a vertical delivery submersible pump suitable for domestic applications like drainage or lifting water form thanks or river. It may be used in automatic or manual mode and it's very easy to handle.

Operating range: from 1 to 10m3/h with head up to 9 metres.

Pumped liquid: dirty water without fibres.

Liquid temperature range: from 0 °C to +35 °C for domestic use.

Outlet: vertical 1” ¼ F plus hose fitting.

VERTY NOVA is a vertical delivery submersible pump suitable for domestic applications like drainage or lifting water form thanks or river. It may be used in automatic or manual mode and it's very easy to handle.

Operating range: from 1 to 10m3/h with head up to 9 metres.

Pumped liquid: dirty water without fibres.

Liquid temperature range: from 0 °C to +35 °C for domestic use.

Outlet: vertical 1” ¼ F plus hose fitting.

Technical Information

Description
C.R.I. “W series” motors are deep well / bore hole rewindable submersible type, pre-filled with water, which acts as coolant and lubricant. These motors are available in three phase power supply and suitable for both normal & high temperature applications. Rotors are supported with bush and thrust bearings to withstand maximum axial and radial thrust loads. All mounting dimensions are in accordance with NEMA standards.

Specification
Nominal Diameter 6″
Series Water Filled Rewindable Submersible Motors
Power Range kW Three Phase : 2.2 – 45 kW
Speed 2900 rpm
Versions Three Phase : 380V – 415V, 525V, 50Hz
Method of Starting 2.2kW – 45kW Direct On Line (DOL), 5.5kW – 45kW Star Delta (SD)
Maximum Down Thrust Load 2.2 – 22kW – 15000N, 26 – 45 kW – 27500N
Type of Duty S1 (Continuous)
Degree of Protection IP 68
Class of Insulation Y
Max.Temperature of Liquid Standard – 30˚C , High Temperature – 50˚C
Minimum Cooling Flow Along the Motor 0.5 m/sec
Starts per Hour 12 Times
Available M.O.C Type A,B,N ,S,T

Features
High efficiency
Water lubricated rewindable motor
Corrosion resistant stainless steel motor body
Extremely hardwearing and water lubricated bearings
Special design for hot water
Can be easily dismantled and repaired

Application
Water supply
Industries
Agriculture

Description
Vansan produces 6-10 inch encapsulated submersible motors. Encapsulated motors are well-known with cheaper repair of the motors. These motors are not prefferred often as rewinding cost is cheaper than stator package cost of the motor. However, with the advantage of being the producer, Vansan balances these costs and creates a product which is preferable.
Normally, motor upper body bearing should be dissassembled to do cable connections one more time when the motor power outlet cable is damaged. This operation can be easily within a few minutes, thanks to the practical socket design used in the encapsulated motors. Moreover, there is no need for an electrical technician to perform this operation.

6” submersible asynchronous two-pole electric motor made entirely of AISI 304 stainless steel and cast iron protected with an electrophoresic paint coating for the parts in contact with water. The 6GX version completely in AISI 316 stainless steel with a silicon carbide mechanical seal can be fitted on request.

Flanging: NEMA 6".

Protection class: IP68.

Max operating depth: 300 m.

Max. starts: 25/h.

6” submersible asynchronous two-pole electric motor made entirely of AISI 304 stainless steel and cast iron protected with an electrophoresic paint coating for the parts in contact with water. The 6GX version completely in AISI 316 stainless steel with a silicon carbide mechanical seal can be fitted on request.

Flanging: NEMA 6".

Protection class: IP68.

Max operating depth: 300 m.

Max. starts: 25/h.

Description
C.R.I i-Prez Series are basically domestic pressure boosting system with built-in variable speed for constant pressure in pipe line. The pressure transducer in this system monitors un-interrupted pressurized water supply at any time. i-Prez also protects the system from dry run, over loading, unbalanced voltages, short circuit etc. The system comprises of Horizontal Multistage Pump, VSD, 5 Way connector with built in NRV, pressure tank, Pressure gauge & pressure transducer.



Specification
Power Range(kW) 0.75kW – 2.2kW
Speed 2900 rpm
Versions Input voltage : Single Phase 220V Output voltage : Three Phase 220V
Duty S1 Continuous
Degree of Protection IP 54
Class of Insulation B/F
Maximum Discharge Upto11 m³/h
Maximum Head Upto 68m

Features
High efficiency
Stainless steel wetted parts
Automatic operation
Soft start ensures smooth operation and increase the life of pump set
Plug & play type

Application
Pressure boosting system
Utility water supply in residences, villas and industries
Car Washer
Gardening

Description
C.R.I i-Prez Series are basically domestic pressure boosting system with built-in variable speed for constant pressure in pipe line. The pressure transducer in this system monitors un-interrupted pressurized water supply at any time. i-Prez also protects the system from dry run, over loading, unbalanced voltages, short circuit etc. The system comprises of Horizontal Multistage Pump, VSD, 5 Way connector with built in NRV, pressure tank, Pressure gauge & pressure transducer.



Specification
Power Range(kW) 0.75kW – 2.2kW
Speed 2900 rpm
Versions Input voltage : Single Phase 220V Output voltage : Three Phase 220V
Duty S1 Continuous
Degree of Protection IP 54
Class of Insulation B/F
Maximum Discharge Upto11 m³/h
Maximum Head Upto 68m

Features
High efficiency
Stainless steel wetted parts
Automatic operation
Soft start ensures smooth operation and increase the life of pump set
Plug & play type

Application
Pressure boosting system
Utility water supply in residences, villas and industries
Car Washer
Gardening

Description
C.R.I i-Prez Series are basically domestic pressure boosting system with built-in variable speed for constant pressure in pipe line. The pressure transducer in this system monitors un-interrupted pressurized water supply at any time. i-Prez also protects the system from dry run, over loading, unbalanced voltages, short circuit etc. The system comprises of Horizontal Multistage Pump, VSD, 5 Way connector with built in NRV, pressure tank, Pressure gauge & pressure transducer.



Specification
Power Range(kW) 0.75kW – 2.2kW
Speed 2900 rpm
Versions Input voltage : Single Phase 220V Output voltage : Three Phase 220V
Duty S1 Continuous
Degree of Protection IP 54
Class of Insulation B/F
Maximum Discharge Upto11 m³/h
Maximum Head Upto 68m

Features
High efficiency
Stainless steel wetted parts
Automatic operation
Soft start ensures smooth operation and increase the life of pump set
Plug & play type

Application
Pressure boosting system
Utility water supply in residences, villas and industries
Car Washer
Gardening

Description
C.R.I i-Prez Series are basically domestic pressure boosting system with built-in variable speed for constant pressure in pipe line. The pressure transducer in this system monitors un-interrupted pressurized water supply at any time. i-Prez also protects the system from dry run, over loading, unbalanced voltages, short circuit etc. The system comprises of Horizontal Multistage Pump, VSD, 5 Way connector with built in NRV, pressure tank, Pressure gauge & pressure transducer.



Specification
Power Range(kW) 0.75kW – 2.2kW
Speed 2900 rpm
Versions Input voltage : Single Phase 220V Output voltage : Three Phase 220V
Duty S1 Continuous
Degree of Protection IP 54
Class of Insulation B/F
Maximum Discharge Upto11 m³/h
Maximum Head Upto 68m

Features
High efficiency
Stainless steel wetted parts
Automatic operation
Soft start ensures smooth operation and increase the life of pump set
Plug & play type

Application
Pressure boosting system
Utility water supply in residences, villas and industries
Car Washer
Gardening

Esybox Mini 3 has a different appearance than any other booster set and is small and completely integrated. Once you install and use it, you realize that the real difference is in the comfort and performance.

Esybox Mini 3 uses the most advanced DAB technologies to create constant pressure according to the system demands and thus an optimization of energy consumption.

Suitable for use with potable water, in domestic systems and gardening applications.
The new 3-rotor model ensures further noise reduction and energy consumption.
Managing the water pressure in your home has never been so simple and quiet.

OPERATING RANGE: flow rate up to 80l/min; head up to 55m

PUMPED LIQUID: clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized and not chemically neutral

LIQUID TEMPERATURE RANGE: from 0°C to + 35°C for domestic use and from 0°C + 40°C for other use

MAXIMUM SUCTION DEPTH: 8 meters

Esybox is a patented booster system, unique in its category, with high performances, efficient, compact, easy and satisfying in the use both for the installer and the final user.
When Esybox mini is the solution for water boosting in small dwellings, Esybox offers the same advantages in collective residential applications, such as villas or condos. Wireless technology allows to set up booster sets up to 4 pumps.



Operating range: capacity up to 120 l/min; head up to 65 m.

Liquid temperature range: from 0°C to +35°C for domestic use for other use: from 0°C to +40°C.

Insulation: Horizontal or vertical fixed position.

Maximum operating pressure: 8 bar (800 kPa).

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries

Technical Information


Description
ECW series are single stage, end suction, back pull out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. Mounting and duties are in accordance with EN 733 with DIN flanges suitable for continuous operation.

Specification
Standard EN 733
Head upto 160m
Maximum Flow upto 600m³/h
Speed 1450/2900 RPM
Impeller Type Enclosed Impeller
Outlet Size upto 150mm
Power upto 200kW
Liquid Temperature upto 90°C
Max Solid Size Not Applicable
Shaft Seal Gland Packing,
Mechanical Seal
Material of Construction (MOC) Cast Iron, Bronze, Stainless Steel & Alloy steel
Bearing Lubrication Grease
Flange Standard DIN
Maximum working Pressure upto 16 bar

Features
Back pull out design
Mounting dimensions and duties as per EN733 Standard
Wide hydraulic ranges
Pre lubricated sealed bearing ensures long life


Application
Water supply
Irrigation
Pressure boosting
Heating, ventilation and air conditioning system
Fire fighting systems
Circulation and transfer application
Utility services in buildings and industries