500ml KS934 Flexible Jointing Compound Sealant Malleable Fitting

BENEFITS:
• Flexible and durable sealing on joints allowing for expansion and contraction.
• Adheres excellently to steel and plastics.
• Environmentally friendly as it is non-toxic, non-flammable and non-solvent based.
• Non-corrosive to the material it is applied to.
• Seals and prevents leakage through the joint area.
• Withstands pressures in excess of 100 bar.
• Performs optimally between temperatures of -30°C and +250°C.
FOR USE 0N:
• Pipes and fittings
• Galvanised steel, Stainless steel, Mild steel, Plastic, Nutec, Concrete, Rubber, PVC.
• Used mainly on threaded joints, however, also has excellent results on flat joints.
• Resists Water, Steam and LPG Gas.
DIRECTIONS FOR USE:
• Stir product well before use.
• Thoroughly clean surfaces with an oil-free cleaner.
• Apply onto ends of the pipes / fittings by using a stiff brush, or dipping ends into the tub.
• Screw / assemble the pipes / fittings while the product is in its uncured form.
• Full cure, prior to switch-on, is 24 hours.
CAUTION:
• Apply in ventilated area and avoid inhalation.
• Do not ingest.
• Keep out of reach of children.
• In case of skin contact, wash with soapy water.
• In case of eye contact, wash with water and seek medical professional advice.
• Consult MSDS for further precautionary information.
SPECIFICATION:
• Physical Form Paste (pre-application) / Rubberised (cured state)
• Colour Off Red/Brown
• Viscosity 1500 — 2000 cps
• Penetration 380 to 480 X1/10mm/100g/Ssec Ip49
• Flash Point + 70°C
• Density @ 25°C 100mI=160g / 1L=1.6kg
• Full curing Time 24 hours
• Shelf life 8 — 12 months depending on climate conditions
• Storage temperature Optimal room temperature between 20°C to 25°C
NB: The manufacturer and distributors will not be held responsible the use of the product beyond their control. Please ensure tests are made specific to your application.